Plastic Spiral Nozzle

Design Features:

* Nozzle Materials: Club-shaped PP material

* Nozzle Structure: one-piece construction no internal parts;

* Spray Patterns: full cone spiral and hollow cone spiral spray;

* Spray angles: from 60 to 170 degree;

* Pressure Range: 0.7 to 25 bar (2.6 to 11960 L/min);

* Inlet connection Type: 1/4", 3/8", 1/2", 3/4", 1", 1-1/2", 2";

* Thread Standard: available in type male or female for NPT or BSPT;

* Also referred to as: Pigtail Nozzles, Sprinkler Head, Twist Jet Nozzle etc.

Plastic Spiral Nozzle Technical Parameters:

The Spiral Nozzle produces a solid cone spray pattern with spray angles ranging from 60 to 170degree. The liquid flow rate range form 5.5 liters per minute to 4140 liters per minute at 3 bars. These compact nozzles permit maximum liquid throughput for a given pipe size, and the free passage design minimizes clogging.

These nozzles can be installed on and replaced from most pipe systems. They are available in brass, 316stainless steel and TEFON for 1/4 to 2 inch inlet connection sizes. Other materials are available in case of application in some special fields.