Product Name : Flat Spray Nozzle

Flat Spray Nozzle

Flat Fan Spray nozzles produce a sharply defined flat fan spray pattern with spray angles from 40-110 degree.

Uniform liquid distribution, high impact, and a wide selection of spray angles are characteristic features.

The nozzles utilize a straight-through flow design with an elliptical orifice. This design offers the widest selection of spray angle, flow rate and configuration.

Specially tapered soar pattern edged provide even spray coverage when several nozzles with overlapping pattern are required.

The Flat Fan Spray Nozzles are widely applied in surface treatment, electronics, environmental protection, steel and car, etc.

Design Features:

   * Nozzle Materials: stainless steel and brass.

   * Nozzle Structure: one-piece construction without internal parts.

   * Spray Pattern: jet stream or flat fan spray pattern.

   * Angle Range: from 40 to 110 degree.

   * Pressure Range: from 0.5 to 35 bar.

   * Flow Rates: from 0.15 to 13.0 L/min.

   * Inlet connection Type: 1/8, 3/8, 1/4, 3/4, 1, 1-1/2, male thread.

   * Also referred to as: Flat Fan Spray Nozzle.

Flat Spray Nozzle Technical Parameters:

Flat Spray Nozzle Typical Applications:

•    * Parts Cleaning;
•    * Metal Washing;
•    * Foam Control;
•    * Asphalt Spraying;
•    * Gravel Washing;
•    * Vehicle Washing;
•    * Fertilizer Spraying;
•    * Dishwashers;
•    * Spray coating;
•    * Lubricating;
•    * Circuit board rinsing;
•    * Metal processing.

Please click the link to contact us: Inquire the product!